diff --git a/THANKS b/THANKS
index 66498d4..a574909 100644
--- a/THANKS
+++ b/THANKS
@@ -224,6 +224,7 @@ Luo Yi luoyi.ly@gmail.com
Maciej Stachowiak mstachow@mit.edu
Maciej W. Rozycki macro@ds2.pg.gda.pl
Manu Rouat emmanuel.rouat@wanadoo.fr
+Marc Herbert marc.herbert@intel.com
Marcus Brinkmann Marcus.Brinkmann@ruhr-uni-bochum.de
Marcus G. Daniels mgd@ute.santafe.edu
Marius Vollmer mvo@zagadka.ping.de
@@ -311,6 +312,7 @@ Peter Muir iyhi@yahoo.com
Peter O'Gorman peter@pogma.com
Peter Rosin peda@lysator.liu.se
Peter Seiderer seiderer123@ciselant.de
+Petr Hracek phracek@redhat.com
Petter Reinholdtsen pere@hungry.com
Petteri Räty betelgeuse@gentoo.org
Phil Edwards phil@jaj.com
@@ -391,6 +393,7 @@ Tim Rice tim@multitalents.net
Tim Van Holder tim.van.holder@pandora.be
Toshio Kuratomi toshio@tiki-lounge.com
Tom Epperly tepperly@llnl.gov
+Tom Rini tom_rini@mentor.com
Ulrich Drepper drepper@gnu.ai.mit.edu
Ulrich Eckhardt eckhardt@satorlaser.com
Václav Haisman V.Haisman@sh.cvut.cz
diff --git a/m4/tar.m4 b/m4/tar.m4
index ec8c83e..aac6d8f 100644
--- a/m4/tar.m4
+++ b/m4/tar.m4
@@ -19,76 +19,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/t/list-of-tests.mk b/t/list-of-tests.mk
index f1e3dca..664a902 100644
--- a/t/list-of-tests.mk
+++ b/t/list-of-tests.mk
@@ -1151,6 +1151,7 @@ t/tags-pr12372.sh \
t/tar.sh \
t/tar2.sh \
t/tar3.sh \
+t/tar-ustar-id-too-high.sh \
t/tar-override.sh \
t/target-cflags.sh \
t/targetclash.sh \
diff --git a/t/tar-override.sh b/t/tar-override.sh
index 863b9ab..bbf3fbb 100755
--- a/t/tar-override.sh
+++ b/t/tar-override.sh
@@ -16,8 +16,8 @@
# Check that the user can override the tar program used by "make dist"
# at runtime, by redefining the 'TAR' environment variable.
-# FIXME: currently this works only when the tar format used is 'v7'
-# FIXME: (which is the default one).
+# NOTE: currently this works only when the tar format used is 'v7'
+# (which is the default one).
. test-init.sh
@@ -35,6 +35,7 @@ chmod a+x am--tar
cat > Makefile.am <<'END'
check-local: dist
+ ls -l ;: For debugging.
test -f am--tar-has-run
CLEANFILES = am--tar-has-run
END
@@ -44,22 +45,24 @@ $AUTOCONF
$AUTOMAKE
./configure
+clean_temp () { rm -f *.tar.* *has-run*; }
+
$MAKE dist
-test -f $me-1.0.tar.gz
+test -f $distdir.tar.gz
ls | grep has-run && exit 1
-rm -f *.tar.* *has-run*
+clean_temp
TAR="$cwd/am--tar foo" $MAKE distcheck
-test -f $me-1.0.tar.gz
+test -f $distdir.tar.gz
test "$(cat am--tar-has-run)" = foo
-rm -f *.tar.* *has-run*
+clean_temp
TAR=; unset TAR
# Creative use of eval to pacify maintainer checks.
eval \$'MAKE dist "TAR=./am--tar mu"'
-test -f $me-1.0.tar.gz
+test -f $distdir.tar.gz
test "$(cat am--tar-has-run)" = mu
:
diff --git a/t/tar-ustar-id-too-high.sh b/t/tar-ustar-id-too-high.sh
new file mode 100755
index 0000000..79ae89d
--- /dev/null
+++ b/t/tar-ustar-id-too-high.sh
@@ -0,0 +1,88 @@
+#! /bin/sh
+# Copyright (C) 2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Check that UID or GID too high for the ustar format are correctly
+# rwcognized and diagnosed by configure. See bug#8343 and bug#13588.
+
+. test-init.sh
+
+cat > configure.ac <<END
+AC_INIT([$me], [1.0])
+AM_INIT_AUTOMAKE([tar-ustar])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+END
+
+: > Makefile.am
+
+run_configure()
+{
+ st=0; ./configure ${1+"$@"} >stdout || st=$?
+ cat stdout || exit 1
+ test $st -eq 0 || exit 1
+}
+
+checked ()
+{
+ grep "^checking $1\.\.\. $2$" stdout
+}
+
+$ACLOCAL
+$AUTOCONF
+$AUTOMAKE
+
+mkdir bin
+cat > bin/id <<'END'
+#!/bin/sh -e
+case "$*" in
+ -u) echo "${am_uid-1000}";;
+ -g) echo "${am_gid-1000}";;
+ *) echo "id: bad/unexpected usage" >&2; exit 1;;
+esac
+END
+chmod a+x bin/id
+
+PATH=$(pwd)/bin$PATH_SEPARATOR$PATH
+
+# Problematic ID reported in
+# <https://bugzilla.redhat.com/show_bug.cgi?id=843376>.
+am_uid=16777216; export am_uid
+am_gid=1000; export am_gid
+run_configure
+checked "whether UID '$am_uid' is supported by ustar format" "no"
+checked "whether GID '1000' is supported by ustar format" "yes"
+checked "how to create a ustar tar archive" "none"
+
+# Another problematic ID reported in
+# <https://bugzilla.redhat.com/show_bug.cgi?id=843376>.
+am_uid=1000; export am_uid
+am_gid=17000000; export am_gid
+run_configure
+checked "whether UID '1000' is supported by ustar format" "yes"
+checked "whether GID '$am_gid' is supported by ustar format" "no"
+checked "how to create a ustar tar archive" "none"
+
+# The minimal ID that is too big.
+two_to_twentyone=$((32 * 32 * 32 * 32 * 2))
+# <https://bugzilla.redhat.com/show_bug.cgi?id=843376>.
+am_uid=$two_to_twentyone; export am_uid
+am_gid=$two_to_twentyone; export am_gid
+run_configure
+checked "whether UID '$two_to_twentyone' is supported by ustar format" "no"
+checked "whether GID '$two_to_twentyone' is supported by ustar format" "no"
+checked "how to create a ustar tar archive" "none"
+
+:
diff --git a/t/tar.sh b/t/tar.sh
index 58e52ea..c146ad9 100755
--- a/t/tar.sh
+++ b/t/tar.sh
@@ -18,8 +18,8 @@
. test-init.sh
-cat > configure.ac << 'END'
-AC_INIT([tar], [1.0])
+cat > configure.ac <<END
+AC_INIT([$me], [1.0])
AM_INIT_AUTOMAKE([tar-ustar])
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
@@ -32,9 +32,12 @@ $AUTOCONF
$AUTOMAKE
./configure
-if grep 'am__tar.*false' Makefile; then
+grep 'am__tar' Makefile # For debugging.
+if grep '^am__tar = false' Makefile; then
skip_ "cannot find proper archiver program"
fi
$MAKE distcheck
-test -f tar-1.0.tar.gz
+test -f "$distdir.tar.gz"
+
+:
diff --git a/t/tar2.sh b/t/tar2.sh
index 5a9d4d7..758d89a 100755
--- a/t/tar2.sh
+++ b/t/tar2.sh
@@ -18,8 +18,8 @@
. test-init.sh
-cat > configure.ac << 'END'
-AC_INIT([tar2], [1.0])
+cat > configure.ac <<END
+AC_INIT([$me], [1.0])
AM_INIT_AUTOMAKE([tar-pax])
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
@@ -32,9 +32,12 @@ $AUTOCONF
$AUTOMAKE
./configure
-if grep 'am__tar.*false' Makefile; then
+grep 'am__tar' Makefile # For debugging.
+if grep '^am__tar = false' Makefile; then
skip_ "cannot find proper archiver program"
fi
$MAKE distcheck
-test -f tar2-1.0.tar.gz
+test -f "$distdir.tar.gz"
+
+:
diff --git a/t/tar3.sh b/t/tar3.sh
index 040d7b4..befc23f 100755
--- a/t/tar3.sh
+++ b/t/tar3.sh
@@ -18,8 +18,8 @@
. test-init.sh
-cat > configure.ac << 'END'
-AC_INIT([tar2], [1.0])
+cat > configure.ac <<END
+AC_INIT([$me], [1.0])
AM_INIT_AUTOMAKE([tar-pax tar-v7])
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
@@ -37,8 +37,8 @@ grep "'tar-v7'" tar-err
rm -rf autom4te.cache
-cat > configure.ac << 'END'
-AC_INIT([tar2], [1.0])
+cat > configure.ac <<END
+AC_INIT([$me], [1.0])
AM_INIT_AUTOMAKE
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
@@ -47,6 +47,6 @@ END
echo 'AUTOMAKE_OPTIONS = tar-pax' > Makefile.am
AUTOMAKE_fails
-grep '^Makefile\.am:1:.*tar-pax.*AM_INIT_AUTOMAKE' stderr
+grep "^Makefile\.am:1:.*'tar-pax'.*AM_INIT_AUTOMAKE" stderr
: