%define build_all 1
%define build_alpha %{build_all}
%define build_arm %{build_all}
%define build_aarch64 %{build_all}
%define build_avr32 %{build_all}
%define build_blackfin %{build_all}
%define build_c6x %{build_all}
%define build_cris %{build_all}
%define build_frv %{build_all}
%define build_h8300 %{build_all}
%define build_hppa64 %{build_all}
%define build_ia64 %{build_all}
%define build_m32r %{build_all}
%define build_m68k %{build_all}
%define build_microblaze %{build_all}
%define build_mips64 %{build_all}
%define build_mn10300 %{build_all}
%define build_openrisc %{build_all}
%define build_powerpc64 %{build_all}
%define build_s390x %{build_all}
%define build_score %{build_all}
%define build_sh %{build_all}
%define build_sh64 %{build_all}
%define build_sparc64 %{build_all}
%define build_tile %{build_all}
%define build_x86_64 %{build_all}
%define build_xtensa %{build_all}
# 32-bit packages we don't build as we can use the 64-bit package instead
%define build_hppa 0
%define build_i386 0
%define build_mips 0
%define build_powerpc 0
%define build_s390 0
%define build_sparc 0
%define build_sh4 0
# not available in binutils-2.22
%define build_hexagon 0
%define build_unicore32 0
Summary: A GNU collection of cross-compilation binary utilities
Name: cross-binutils
Version: 2.23.51.0.3
Release: 1%{?dist}
License: GPLv3+
Group: Development/Tools
URL: http://sources.redhat.com/binutils
Source: ftp://ftp.kernel.org/pub/linux/devel/binutils/binutils-%{version}.tar.xz
# The ftp.kernel.org/pub/linux/devel/binutils/ page is (temporarily) unavailable
# so we use the GNU site instead.
# Source: http://ftp.gnu.org/gnu/binutils/binutils-%{version}.tar.bz2
Source2: binutils-2.19.50.0.1-output-format.sed
Patch01: binutils-2.20.51.0.2-libtool-lib64.patch
Patch02: binutils-2.20.51.0.10-ppc64-pie.patch
Patch03: binutils-2.20.51.0.2-ia64-lib64.patch
Patch04: binutils-2.20.51.0.2-version.patch
Patch05: binutils-2.20.51.0.2-set-long-long.patch
Patch06: binutils-2.20.51.0.10-copy-osabi.patch
Patch07: binutils-2.20.51.0.10-sec-merge-emit.patch
# Enable -zrelro by default: BZ #621983
Patch08: binutils-2.22.52.0.1-relro-on-by-default.patch
# Local patch - export demangle.h with the binutils-devel rpm.
Patch09: binutils-2.22.52.0.1-export-demangle.h.patch
# Disable checks that config.h has been included before system headers. BZ #845084
Patch10: binutils-2.22.52.0.4-no-config-h-check.patch
# Renames ARM LDRALT insn to LDALT. BZ# 869025
Patch11: binutils-2.23.51.0.3-arm-ldralt.patch
Buildroot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
BuildRequires: texinfo >= 4.0, gettext, flex, bison, zlib-devel
# Required for: ld-bootstrap/bootstrap.exp bootstrap with --static
# It should not be required for: ld-elf/elf.exp static {preinit,init,fini} array
Conflicts: gcc-c++ < 4.0.0
%ifarch ia64
Obsoletes: gnupro <= 1117-1
%endif
Provides: bundled(libiberty)
%description
Binutils is a collection of binary utilities, including ar (for
creating, modifying and extracting from archives), as (a family of GNU
assemblers), gprof (for displaying call graph profile data), ld (the
GNU linker), nm (for listing symbols from object files), objcopy (for
copying and translating object files), objdump (for displaying
information from object files), ranlib (for generating an index for
the contents of an archive), readelf (for displaying detailed
information about binary files), size (for listing the section sizes
of an object or archive file), strings (for listing printable strings
from files), strip (for discarding symbols), and addr2line (for
converting addresses to file and line).
%package -n cross-binutils-common
Summary: Cross-build binary utility documentation and translation files
Group: Development/Tools
BuildArch: noarch
%description -n cross-binutils-common
Documentation, manual pages and translation files for cross-build binary image
generation, manipulation and query tools.
%define do_package() \
%if %2 \
%package -n binutils-%1 \
Summary: Cross-build binary utilities for %1 \
Group: Development/Tools \
Requires: cross-binutils-common == %{version}-%{release} \
%description -n binutils-%1 \
Cross-build binary image generation, manipulation and query tools. \
%endif
%do_package alpha-linux-gnu %{build_alpha}
%do_package arm-linux-gnu %{build_arm}
%do_package aarch64-linux-gnu %{build_aarch64}
%do_package avr32-linux-gnu %{build_avr32}
%do_package bfin-linux-gnu %{build_blackfin}
%do_package c6x-linux-gnu %{build_c6x}
%do_package cris-linux-gnu %{build_cris}
%do_package frv-linux-gnu %{build_frv}
%do_package h8300-linux-gnu %{build_h8300}
%do_package hexagon-linux-gnu %{build_hexagon}
%do_package hppa-linux-gnu %{build_hppa}
%do_package hppa64-linux-gnu %{build_hppa64}
%do_package i386-linux-gnu %{build_i386}
%do_package ia64-linux-gnu %{build_ia64}
%do_package m32r-linux-gnu %{build_m32r}
%do_package m68k-linux-gnu %{build_m68k}
%do_package microblaze-linux-gnu %{build_microblaze}
%do_package mips-linux-gnu %{build_mips}
%do_package mips64-linux-gnu %{build_mips64}
%do_package mn10300-linux-gnu %{build_mn10300}
%do_package openrisc-linux-gnu %{build_openrisc}
%do_package powerpc-linux-gnu %{build_powerpc}
%do_package powerpc64-linux-gnu %{build_powerpc64}
%do_package s390-linux-gnu %{build_s390}
%do_package s390x-linux-gnu %{build_s390x}
%do_package score-linux-gnu %{build_score}
%do_package sh-linux-gnu %{build_sh}
%do_package sh4-linux-gnu %{build_sh4}
%do_package sh64-linux-gnu %{build_sh64}
%do_package sparc-linux-gnu %{build_sparc}
%do_package sparc64-linux-gnu %{build_sparc64}
%do_package tile-linux-gnu %{build_tile}
%do_package unicore32-linux-gnu %{build_unicore32}
%do_package x86_64-linux-gnu %{build_x86_64}
%do_package xtensa-linux-gnu %{build_xtensa}
# Where the binaries aimed at gcc will live (ie. /usr/<target>/bin/)
%define auxbin_prefix %{_exec_prefix}
###############################################################################
#
# Preparation
#
###############################################################################
%prep
%define srcdir binutils-%{version}
%setup -q -n %{srcdir} -c
cd %{srcdir}
%patch01 -p0 -b .libtool-lib64~
%patch02 -p0 -b .ppc64-pie~
%ifarch ia64
%if "%{_lib}" == "lib64"
%patch03 -p0 -b .ia64-lib64~
%endif
%endif
%patch04 -p0 -b .version~
%patch05 -p0 -b .set-long-long~
%patch06 -p0 -b .copy-osabi~
%patch07 -p0 -b .sec-merge-emit~
%if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
%patch08 -p0 -b .relro~
%endif
%patch09 -p0 -b .export-demangle-h~
%patch10 -p0 -b .no-config-h-check~
%patch11 -p0 -b .arm-ldralt~
# We cannot run autotools as there is an exact requirement of autoconf-2.59.
# On ppc64 we might use 64KiB pages
sed -i -e '/#define.*ELF_COMMONPAGESIZE/s/0x1000$/0x10000/' bfd/elf*ppc.c
# LTP sucks
perl -pi -e 's/i\[3-7\]86/i[34567]86/g' */conf*
sed -i -e 's/%''{release}/%{release}/g' bfd/Makefile{.am,.in}
sed -i -e '/^libopcodes_la_\(DEPENDENCIES\|LIBADD\)/s,$, ../bfd/libbfd.la,' opcodes/Makefile.{am,in}
# Build libbfd.so and libopcodes.so with -Bsymbolic-functions if possible.
if gcc %{optflags} -v --help 2>&1 | grep -q -- -Bsymbolic-functions; then
sed -i -e 's/^libbfd_la_LDFLAGS = /&-Wl,-Bsymbolic-functions /' bfd/Makefile.{am,in}
sed -i -e 's/^libopcodes_la_LDFLAGS = /&-Wl,-Bsymbolic-functions /' opcodes/Makefile.{am,in}
fi
# $PACKAGE is used for the gettext catalog name.
sed -i -e 's/^ PACKAGE=/ PACKAGE=cross-/' */configure
# Undo the name change to run the testsuite.
for tool in binutils gas ld
do
sed -i -e "2aDEJATOOL = $tool" $tool/Makefile.am
sed -i -e "s/^DEJATOOL = .*/DEJATOOL = $tool/" $tool/Makefile.in
done
touch */configure
function prep_target () {
target=$1
cond=$2
if [ $cond = 1 ]
then
echo $1 >&5
fi
}
cd ..
(
prep_target alpha-linux-gnu %{build_alpha}
prep_target arm-linux-gnu %{build_arm}
prep_target aarch64-linux-gnu %{build_aarch64}
prep_target avr32-linux-gnu %{build_avr32}
prep_target bfin-linux-gnu %{build_blackfin}
prep_target c6x-linux-gnu %{build_c6x}
prep_target cris-linux-gnu %{build_cris}
prep_target frv-linux-gnu %{build_frv}
prep_target h8300-linux-gnu %{build_h8300}
prep_target hexagon-linux-gnu %{build_hexagon}
prep_target hppa-linux-gnu %{build_hppa}
prep_target hppa64-linux-gnu %{build_hppa64}
prep_target i386-linux-gnu %{build_i386}
prep_target ia64-linux-gnu %{build_ia64}
prep_target m32r-linux-gnu %{build_m32r}
prep_target m68k-linux-gnu %{build_m68k}
prep_target microblaze-linux-gnu %{build_microblaze}
prep_target mips-linux-gnu %{build_mips}
prep_target mips64-linux-gnu %{build_mips64}
prep_target mn10300-linux-gnu %{build_mn10300}
prep_target openrisc-linux-gnu %{build_openrisc}
prep_target powerpc-linux-gnu %{build_powerpc}
prep_target powerpc64-linux-gnu %{build_powerpc64}
prep_target s390-linux-gnu %{build_s390}
prep_target s390x-linux-gnu %{build_s390x}
prep_target score-linux-gnu %{build_score}
prep_target sh-linux-gnu %{build_sh}
prep_target sh4-linux-gnu %{build_sh4}
prep_target sh64-linux-gnu %{build_sh64}
prep_target sparc-linux-gnu %{build_sparc}
prep_target sparc64-linux-gnu %{build_sparc64}
prep_target tile-linux-gnu %{build_tile}
prep_target unicore32-linux-gnu %{build_unicore32}
prep_target x86_64-linux-gnu %{build_x86_64}
prep_target xtensa-linux-gnu %{build_xtensa}
) 5>target.list
n=0
for target in `cat target.list`
do
n=1
break
done
if [ $n = 0 ]
then
echo "No targets selected" >&2
exit 8
fi
###############################################################################
#
# Build
#
###############################################################################
%build
function config_target () {
arch=$1
prefix=$arch-
build_dir=$arch
case $arch in
arm-*) target=arm-linux-gnueabi;;
aarch64-*) target=aarch64-linux-gnu;;
avr32-*) target=avr-linux;;
bfin-*) target=bfin-uclinux;;
c6x-*) target=c6x-uclinux;;
h8300-*) target=h8300-elf;;
mn10300-*) target=am33_2.0-linux;;
m68knommu-*) target=m68k-linux;;
openrisc-*) target=openrisc-elf;;
score-*) target=score-elf;;
sh64-*) target=sh64-linux;;
tile-*) target=tilegx-linux;;
v850-*) target=v850e-linux;;
*) target=$arch;;
esac
echo $arch: target is $target
export CFLAGS="$RPM_OPT_FLAGS"
CARGS=
case $target in hppa64*)
CARGS="$CARGS --enable-targets=hppa-linux-gnu"
;;
esac
case $target in i?86*|sparc*|ppc*|s390*|sh*|arm*)
CARGS="$CARGS --enable-64-bit-bfd"
;;
esac
case $target in ia64*)
CARGS="$CARGS --enable-targets=i386-linux"
;;
esac
case $target in ppc*|ppc64*)
CARGS="$CARGS --enable-targets=spu"
;;
esac
case $target in sh-*)
CARGS="$CARGS --enable-targets=sh4-linux"
;;
esac
case $target in sh64*)
CARGS="$CARGS --enable-targets=sh64-linux,sh-elf,sh-linux,sh4-linux"
;;
esac
mkdir $build_dir
cd $build_dir
# We could optimize the cross builds size by --enable-shared but the produced
# binaries may be less convenient in the embedded environment.
LDFLAGS='-Wl,-z,relro ' \
../%{srcdir}/configure \
--disable-dependency-tracking \
--disable-silent-rules \
--enable-checking \
--prefix=%{_prefix} \
--exec-prefix=%{auxbin_prefix} \
--bindir=%{_bindir} \
--sbindir=%{_sbindir} \
--sysconfdir=%{_sysconfdir} \
--datadir=%{_datadir} \
--includedir=%{_includedir} \
--libdir=%{_libdir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--sharedstatedir=%{_sharedstatedir} \
--mandir=%{_mandir} \
--infodir=%{_infodir} \
--build=%{_target_platform} \
--host=%{_target_platform} \
--target=$target \
--program-prefix=$prefix \
--disable-shared \
--disable-install_libbfd \
$CARGS \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/
cd ..
}
for target in `cat target.list`
do
config_target $target
done
function build_target () {
arch=$1
make -C $arch %{_smp_mflags} tooldir=%{_prefix} all
}
for target in `cat target.list`
do
build_target $target
done
# for documentation purposes only
mkdir cross-binutils
cd cross-binutils
../%{srcdir}/configure \
--disable-dependency-tracking \
--disable-silent-rules \
--prefix=%{_prefix} \
--exec-prefix=%{auxbin_prefix} \
--bindir=%{_bindir} \
--sbindir=%{_sbindir} \
--sysconfdir=%{_sysconfdir} \
--datadir=%{_datadir} \
--includedir=%{_includedir} \
--libdir=%{_libdir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--sharedstatedir=%{_sharedstatedir} \
--mandir=%{_mandir} \
--infodir=%{_infodir} \
--program-prefix=cross- \
--disable-shared \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/
make %{_smp_mflags} tooldir=%{_prefix} all
cd ..
###############################################################################
#
# Installation
#
###############################################################################
%install
rm -rf %{buildroot}
function install_bin () {
cross=$1
make install -C $cross DESTDIR=%{buildroot}
}
for target in `cat target.list`
do
echo "=== INSTALL target $target ==="
install_bin $target
# if [ $target = sh64-linux-gnu ]
# then
# ln -s %{auxbin_prefix}/sh64-elf %{buildroot}%{auxbin_prefix}/sh64-linux
# fi
done
echo "=== INSTALL man targets ==="
make install-man1 -C cross-binutils/binutils/doc DESTDIR=%{buildroot}
make install-man1 -C cross-binutils/gas/doc DESTDIR=%{buildroot}
make install-man1 -C cross-binutils/ld DESTDIR=%{buildroot}
make install-man1 -C cross-binutils/gprof DESTDIR=%{buildroot}
echo "=== INSTALL po targets ==="
make install -C cross-binutils/binutils/po DESTDIR=%{buildroot}
make install -C cross-binutils/gas/po DESTDIR=%{buildroot}
make install -C cross-binutils/ld/po DESTDIR=%{buildroot}
make install -C cross-binutils/gprof/po DESTDIR=%{buildroot}
make install -C cross-binutils/bfd/po DESTDIR=%{buildroot}
make install -C cross-binutils/opcodes/po DESTDIR=%{buildroot}
# For cross-binutils we drop the documentation.
echo "=== REMOVE documentation ==="
rm -rf %{buildroot}%{_infodir}
rm -f %{buildroot}%{_infodir}/dir
echo "=== REMOVE libraries and scripts ==="
rm -rf %{buildroot}%{_libdir}/libiberty.a
rm -rf %{buildroot}%{auxbin_prefix}/*/lib/ldscripts
rmdir %{buildroot}%{auxbin_prefix}/*/lib || :
echo "=== BUILD file lists ==="
function build_file_list () {
arch=$1
cpu=${arch%%%%-*}
case $cpu in
avr32) target_cpu=avr;;
bfin) target_cpu=bfin;;
h8300) target_cpu=h8300;;
mn10300) target_cpu=am33_2.0;;
openrisc) target_cpu=openrisc;;
score) target_cpu=score;;
tile) target_cpu=tilegx;;
v850) target_cpu=v850e;;
*) target_cpu=$cpu;;
esac
(
echo '%%defattr(-,root,root,-)'
echo %{_bindir}/$arch-[!l]\*
echo %{_bindir}/$arch-ld\*
echo %{auxbin_prefix}/$target_cpu-*/bin/\*
echo %{_mandir}/man1/$arch-\*
) >files.$arch
}
for target in `cat target.list`
do
build_file_list $target
done
# All the installed manual pages and translation files for each program are the
# same, so symlink them to the core package
echo "=== CROSSLINK man pages ==="
cd %{buildroot}%{_mandir}/man1
for i in cross-*.1*
do
j=${i#cross-}
for k in *-$j
do
if [ $k != $i ]
then
ln -sf $i $k
fi
done
done
# Add ld.bfd manual pages
find * -name "*ld.1*" -a ! -name "cross-ld.1*" -print |
while read x
do
y=`echo $x | sed -e s/ld[.]1/ld.bfd.1/`
ln -s $x $y
done
cd -
# Find the language files which only exist in the common package
(
%find_lang cross-binutils
%find_lang cross-opcodes
%find_lang cross-bfd
%find_lang cross-gas
%find_lang cross-ld
%find_lang cross-gprof
cat cross-binutils.lang
cat cross-opcodes.lang
cat cross-bfd.lang
cat cross-gas.lang
cat cross-ld.lang
cat cross-gprof.lang
) >files.cross
###############################################################################
#
# Cleanup
#
###############################################################################
%clean
rm -rf %{buildroot}
###############################################################################
#
# Filesets
#
###############################################################################
%files -n cross-binutils-common -f files.cross
%doc %{srcdir}/README
%doc %{srcdir}/COPYING*
%{_mandir}/man1/cross-*
%define do_files() \
%if %2 \
%files -n binutils-%1 -f files.%1 \
%endif
%do_files alpha-linux-gnu %{build_alpha}
%do_files arm-linux-gnu %{build_arm}
%do_files aarch64-linux-gnu %{build_aarch64}
%do_files avr32-linux-gnu %{build_avr32}
%do_files bfin-linux-gnu %{build_blackfin}
%do_files c6x-linux-gnu %{build_c6x}
%do_files cris-linux-gnu %{build_cris}
%do_files frv-linux-gnu %{build_frv}
%do_files h8300-linux-gnu %{build_h8300}
%do_files hexagon-linux-gnu %{build_hexagon}
%do_files hppa-linux-gnu %{build_hppa}
%do_files hppa64-linux-gnu %{build_hppa64}
%do_files i386-linux-gnu %{build_i386}
%do_files ia64-linux-gnu %{build_ia64}
%do_files m32r-linux-gnu %{build_m32r}
%do_files m68k-linux-gnu %{build_m68k}
%do_files microblaze-linux-gnu %{build_microblaze}
%do_files mips-linux-gnu %{build_mips}
%do_files mips64-linux-gnu %{build_mips64}
%do_files mn10300-linux-gnu %{build_mn10300}
%do_files openrisc-linux-gnu %{build_openrisc}
%do_files powerpc-linux-gnu %{build_powerpc}
%do_files powerpc64-linux-gnu %{build_powerpc64}
%do_files s390-linux-gnu %{build_s390}
%do_files s390x-linux-gnu %{build_s390x}
%do_files score-linux-gnu %{build_score}
%do_files sh-linux-gnu %{build_sh}
%do_files sh4-linux-gnu %{build_sh4}
%do_files sh64-linux-gnu %{build_sh64}
%do_files sparc-linux-gnu %{build_sparc}
%do_files sparc64-linux-gnu %{build_sparc64}
%do_files tile-linux-gnu %{build_tile}
%do_files unicore32-linux-gnu %{build_unicore32}
%do_files x86_64-linux-gnu %{build_x86_64}
%do_files xtensa-linux-gnu %{build_xtensa}
%changelog
* Fri Nov 2 2012 David Howells <dhowells@redhat.com> - 2.23.51.0.3-1
- Update to binutils-2.23.51.0.3.
- Added support for aarch64.
* Mon Oct 15 2012 Jon Ciesla <limburgher@gmail.com> - 2.22.52.0.3-4
- Provides: bundled(libiberty)
* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.22.52.0.3-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Wed Jul 11 2012 Dan HorĂ¡k <dan[at]danny.cz> - 2.22.52.0.3-2
- don't install libbfd/libopcode when host == target (eg. on s390x)
* Wed May 30 2012 David Howells <dhowells@redhat.com> - 2.22.52.0.3-1
- Update to binutils-2.22.52.0.3.
- Fixed a warning in the assembler for h8300 that caused the build to fail.
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 2.22.52.0.1-8.1
- Initial import of cross-binutils [BZ 761619].
* Wed Mar 07 2012 Jakub Jelinek <jakub@redhat.com> - 2.22.52.0.1-8
- Fix up handling of hidden ifunc relocs on x86_64
- Add Intel TSX support